The tire shredder plays a crucial role in the batch recovery of used tires. It is the most potential shredder in the shredder market today. The tire shredder's spindle may bend. What should we do? What to do?
What should I do if the main axis of the tire shredder bends? <br /> First, what are the hazards of the main axis of the tire shredder?
1. Affects the service life of the spindle; 2. Dry and cutting of the blade reduces the service life of the blade; 3. Influences the size of the processing material; 4. Reduces the service life of the bearing; 5. It is not easy to install; 6. If a direct reduction gear is used, it will The service life of the reducer; the belt drive is used, the belt is easy to jump, and the service life of the V-belt is reduced.
What to do after the tire shredder's main shaft is bent:
1. Use the press to proofread the fourth paragraph.
2. Use the four-jaw chuck to clamp the fifth segment, select the base frame to support the structure to support the third segment, and straighten the base of the fourth segment. Hit the base, then use a thimble to hold it, remove the base frame, the first and third paragraphs of the refined car list, the rough car is somewhat empty.
3. Spindle head change processing. Use the four-jaw chuck to clamp the first paragraph of the list, select the base frame to support the structure to support the fifth paragraph, and straighten the base of the fourth paragraph. Hit the base, then use a thimble to hold it, remove the base frame, finish the fifth section of the car, the rough car is somewhat empty. Finish the process.
Therefore, tire shredder manufacturers must strictly guarantee the accuracy of the spindle to ensure the service life of the equipment and increase customer satisfaction.
Scan and follow us